JVC GR-AXM210 Instructions Manual page 22

22
EN
P. STABILIZER Button
Display
Picture stabilizer indicator
RECORDING
FEATURE:
PURPOSE:
To compensate for unstable images caused by camera-
shake, particularly at high magnification.
OPERATION:
1) Press P. STABILIZER. "
NOTES:
Power Switch
Picture Stabilizer
To switch off the Picture Stabilizer, press
P. STABILIZER. The indicator disappears.
Accurate stabilization may not be possible if hand
shake is excessive, or under the following condi-
tions:
• When shooting subjects with vertical or horizontal
stripes.
• When shooting dark or dim subjects.
• When shooting subjects with excessive
backlighting.
• When shooting scenes with movement in various
directions.
• When shooting scenes with low-contrast back-
grounds.
Switch off the Picture Stabilizer when recording
with the camcorder on a tripod.
The " " indicator appears blinking if the
Stabilizer cannot be used.
Basic Features (cont.)
"appears.