Table of Contents
Advertisement
M S-9828 M ainboard
Therefore, if the AGP driver of the VGA card does not support the initialization
feature, the display may work abnormally or not function after resuming from S3.
Suspend Time Out (M inute)
After the selected period of system inactivity, the system automatically enters Sus-
pend mode.
Power Button Function
This feature sets the function of the power button. Settings are:
[Power On/Off] The power button functions as normal power on/off button.
[Suspend]
Restore On AC Power Loss
This item specifies whether your system will reboot after a power failure or interrupt
occurs. Settings are:
[Off]
[On]
[Last State]
Wake Up Event Setup
Resume From S3 By USB Device
The item allows the activity of the USB device to wake up the system from S3
(Suspend to RAM) sleep state.
3-18
W hen you press the power button, the computer enters the
suspend/sleep mode, but if the button is pressed for more
than four seconds, the computer is turned off.
Always leaves the computer in the power off state.
Always leaves the computer in the power on state.
Restores the system to the status before power failure
or interrupt occurred.
Advertisement
Table of Contents
