M S-9828 M ainboard
I/O Devices
COM Port 1, COM Port 2
These settings specify the base I/O port address and IRQ resource of the
onboard serial ports.
Parallel Port
This setting specifies the I/O port address of the onboard parallel port.
Parallel Port M ode
This setting allows you to specify the operation mode of the parallel port.
Watch Dog
You can enable the system watch-dog timer, a hardware timer that generates
either an NMI or a reset when the software that it monitors does not respond as
expected each time the watch dog polls it.
Watch Dog Timer
This setting specifies the W atch Dog Timer time out value.
3-16