Table of Contents
Advertisement
Fan Power Connector: CPUFAN1, SYSFAN1, SYSFAN2
The fan power connectors support system cooling fan with +12V. W hen connecting
the wire to the connectors, always note that the red wire is the positive and should
be connected to the +12V; the black wire is Ground and should be connected to GND.
If the mainboard has a System Hardware Monitor chipset onboard, you must use a
specially designed fan with speed sensor to take advantage of the CPU fan control.
CONTROL
SENSOR
+1 2V
GND
CPUFAN1
Important
Please refer to the recommended CPU fans at AMD
the vendors for proper CPU cooling fan.
Serial ATA II Connector: SATA1 ~ SATA4
This connector is a high-speed Serial ATA II interface port. Each connector can
connect to one Serial ATA II device.
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise,
data loss may occur during transmission.
SYSFAN2
GND
+1 2V
SENSOR
CONTROL
SYSFAN1
®
official website or consult
Hardware Setup
2-11
Advertisement
Table of Contents
