Mercedes-Benz COMAND Operator's Manual page 81

In the following situations, it is not possible or not yet
possible to use the telephone:
• The telephone is already unlocked but is not (yet)
registered in the network. The message "No
Service" is displayed. The telephone will try to
register into the network. If the network is avail-
able, the telephone will be ready for use. The above
message also appears if the network is no longer
available due to weak signals.
The message "No Service" is displayed for 8 sec-
onds if you try to make a call.
• The message "Telephone is being activated. Please
wait" appears. The phone is being initialized for
use. Select other equipment functions by pressing
the corresponding button or wait until the phone is
active.
• The message "Error: Phone not connected" is
displayed. Please connect the telephone.
• The message "Error: Phone defective" appears. The
telephone cannot work because an error has
occured. Please contact a Mercedes-Benz Center.
Telephone
Notes
Audio
Introduction
Telephone
Telephone
In the following situation, it is not yet possible to use
the functions "Dial number from phone book" or
"Speed-dial".
• The mobile telephone has been plugged into its
holder correctly the COMAND operating unit has
been switched on and the telephone function
download function has been actuated (see
telephone section in operator's manual).
In the following situations it is not possible to make a
call and following messages appear:
• "System busy, redial?" – dialing has failed because
system is busy.
• "No Service, redial?" – dialing has failed because
network cannot be received.
• "Phone off" – Tele Aid is active, the telephone
function will switch on automatically after Tele Aid
is ended.
79
Info Services and
Navigation
system settings
Index