Mercedes-Benz COMAND Operator's Manual page 154

Introduction Audio
Destination input
Altering the map scale
10
8
Display of the scale bar is activated by either one of two
actions:
• Press or
• Press the right-hand rotary/pushbutton
8 Current map scale
9 Scale bar, 12 different scales are available from
0.1 mi/inch to 500 mi/inch
10 New scale
11 Square frames enlarged section of the map
Telephone
11
8 9
P82.85-3018-26
.
Info Services and
Navigation
system settings
152
Press or turn the right-hand rotary/pushbutton
to the left.
A square will appear around the cross-hairs, it indicates
the new map section.
Reduce the map scale (activates a less detailed map):
Press or turn the right-hand rotary/pushbutton
to the right.
Press the right-hand rotary/pushbutton
calculate the new map section. This will take place
automatically after 8 seconds.
Note:
To select destinations which are not directly located in the
vicinity of the map section on the screen, it is advisable to
access the overview map. Then use the number keys to
position the cross hairs near the destination. Now switch
to the detail map and move the cross hairs to your desired
destination.
Confirming destination:
Once the cross hairs mark the desired destination, press
the right-hand rotary/pushbutton
Then select the route calculation mode and calculate your
route, page 159.
Index
briefly to
longer than 2 seconds.