Learning About The Remote Control - Toshiba 26HL37 Owner's Manual

267470726HL37_EN.book Page 18 Friday, July 6, 2007 7:44 PM

Learning about the remote control

The buttons used for operating the TV only are described here.
For a complete list of the remote control's functions, see the
remote control functional key chart (- page 20).
Note: The error message "Not Available" may appear if you
press a key for a function that is not available.
18
Chapter 3: Using the remote control
POWER turns the TV on and off. Press p to turn on the
1
TV. The green LED indicator on the TV front will be
illuminated. Press p again to turn off the TV.
2 FREEZE freezes the picture. Press again to restore the
moving picture.
3 SLEEP accesses the sleep timer (
4 PIC SIZE selects the pictures sizes: Natural,
TheaterWide 1/2/3, Full, 4:3 HD, and Native
( - page 31).
5 Channel Numbers (0–9, –/100) directly tune
channels.
6 INPUT selects the video input source (
CH Bb cycles through programmed channels when no
7
menu is on-screen (
8 VOL + – adjusts the volume level.
9 PIC MODE selects the picture mode (page 35).
10 RECALL displays TV setting information on-screen
(- page 44).
11 CH RTN returns to the last viewed channel or source
(- page 31).
12 MUTE reduces or turns off the sound (- page 38).
13 No Function (This button is not available for this TV.)
14 Arrow buttons (BbC c) When a menu is on-screen,
these buttons select or adjust programming menus.
15 FAV Bb tunes to the next higher/lower favorite channel
(- page 28).
16 ENTER activates highlighted items in the main menu
system.
17 MENU accesses the main TV menu system (
and 25).
18 EXIT closes on-screen menus.
19 MODE SELECT Switch switches between TV,
CABLE/SAT, DVD, and VCR modes (
"TV" to control the TV.
-
page 43).
- page 30).
- page 26).
-
pages 24
-
page 19). Set to
HL37 (E/F) Web 213:276