Table of Contents
Advertisement
5-4
Clock and Alarms
This section discusses how to use the clock and alarms features on your Sonos Controller for Mac or PC.
Setting date and time
From the Rooms menu, select Clocks and Alarms.
1.
Click the Date and Time button.
2.
Choose one of the following options:
3.
• Select your time zone, desired time format, and date format, and then click OK.
• Select the Set the date and time from the Internet radio button, and then click OK.
• Select the Set the date and time manually radio button. Make your selections from the displayed fields, and then click
OK.
Adding an alarm
From the Rooms menu, select Clocks and Alarms.
1.
Click New.
2.
Choose the desired settings for this alarm, including the alarm time, the room you would like the alarm to play in, the
3.
music source you'd like to play from, the frequency of the alarm, and the volume and duration settings.
• If you check Include Linked Rooms, the alarm will play in the rooms that are linked together at the time the alarm
goes off. It does not play in the rooms that were linked when the alarm was originally added to the Sonos system.
• If you check Shuffle music, the play mode for the selected alarm music will be set to shuffle.
Note: If the music you've selected is not available (such as a radio station that has dropped
off), your alarm will play the Sonos chime instead.To stop the chime, you can press Pause.
Editing an alarm
From the Rooms menu, select Clocks and Alarms.
1.
Select the alarm you wish to change, and click Edit.
2.
Make the desired changes, and click OK.
3.
• If you check Include Linked Rooms, the alarm will play in the rooms that are linked together when the alarm goes off.
It does not play in the rooms that were linked when the alarm was originally added to the Sonos system.
• If you check Shuffle music, the play mode for the selected alarm music will be set to shuffle.
User Guide
Advertisement
Table of Contents
