Table of Contents
Advertisement
Sonos Controller for Mac or PC
Select Add a Sonos Component from the Rooms menu.
4.
During the setup process, you will be asked to press and release the Mute and Volume Up buttons or the Join button,
depending on the Sonos component you are adding.
You may release the buttons as soon as they begin to blink (this takes approximately 1 second.)
Important Note: Do not place any items on top of your Sonos component. This may impede
the air flow and cause it to overheat.
Renaming a Sonos Component
If you name a Sonos component incorrectly, or if you move one to another room, you can rename it to suit your preference.
From the Rooms menu, select Room Settings. If you want to change a BRIDGE, select BRIDGE Settings instead.
1.
Select the room you wish to change, and click Settings. Select a new name from the Room Type list, or type a custom
2.
name in the Room Name field, and then click OK.
Turning Off Status Indicator
A white light displays on the front of most Sonos components to indicate that the unit is functioning in normal operation. If
you have a Sonos component located in a bedroom, you may want to turn this Status Indicator Light off so that when the unit
is in normal operation, the white light does not display.
However, if the Status indicator light begins to flash amber, see "Player Status Indicators" on page A-7 for additional
information.
From the Rooms menu, click Room Settings. (If you wish to turn off a BRIDGE status indicator light, select BRIDGE
1.
Settings instead.)
Highlight the Sonos component you wish to adjust, and click Settings.
2.
From the Status Indicator Light tab, select On or Off and click OK.
3.
2-7
Advertisement
Table of Contents
