Table of Contents
Advertisement
Sonos Controller for Mac or PC
Select Rooms -> Room Settings.
1.
Select one of the Sonos components (PLAY:3 or PLAY:5 only) you wish to pair, and click Settings.
2.
Click the Stereo Pair tab, and select Create Stereo Pair.
3.
Click Next, select the other unit you want to pair, and then click Next.
4.
Press the Mute button on the Sonos component that will become the left channel.
5.
To separate a stereo pair:
Select Rooms -> Room Settings.
1.
Select the Sonos stereo pair you wish to separate (the stereo pair will appear with L + R in the room name), and then
2.
click Settings.
Click the Stereo Pair tab, and select Separate Pair.
3.
Click OK, and then click Finish.
4.
Line-out
You can easily connect your home theater, stereo, or powered speakers to some Sonos components. Depending on your
Sonos component, you can use analog or digital audio outputs to connect to an external amplifier. The CONNECT has both
digital and analog outputs, the ZonePlayer 100 has analog outputs, while the CONNECT:AMP is not designed with audio
outputs.
For additional information on connecting audio devices, go to our Web site at http://faq.sonos.com/cables.
Connecting to a home theater
Choose one of the following options:
1.
• If you have digital inputs on your home theater receiver and your Sonos component supports digital audio output, you
can use either a TOSLINK® optical audio cable or a digital coaxial cable to connect from the CONNECT's Digital Audio Out
to the digital input on your home theater receiver.
• If you have analog inputs on your receiver, use a standard RCA audio cable to connect from the Sonos component's An-
alog Audio Out to the audio inputs on your home theater receiver.
Select the proper input channel on your home theater system.
2.
If you are setting up a new Sonos component that has audio outputs, plug it in and then select Add a Sonos Component
3.
from the Rooms menu.
Controlling the volume from home theater
Select Room Settings from the Rooms menu.
1.
Select the Sonos component attached to your home theater, select Settings -> Line-Out, and then choose Fixed.
2.
Note: When the line-out level on your Sonos component is Fixed, you cannot adjust the
volume or the equalization settings using your Sonos Controller.
2-11
Advertisement
Table of Contents
