Vivotek IP8132 User Manual page 122

VIVOTEK
protocol_sip
protocol_maxconnectio
n
protocol_maxgenconne
ction
protocol_maxmegacon
nection
protocol_rtp_multicast_
scalable
protocol_rtp_multicast_
backchannel
protocol_rtp_tcp
protocol_rtp_http
protocol_spush_mjpeg
protocol_snmp
protocol_ipv6
videoin_type
videoin_resolution
videoin_maxframerate
videoin_codec
videoin_streamcodec
videoout_codec
122 - User's Manual
<boolean> 0/7
<positive integer> 0/7
<positive integer> 0/7
<positive integer> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
0, 1, 2 0/7
0/7
<a list of available
resolution
separated by
commas>
<a list of available 0/7
maximum frame
rate separated by
commas>
mpeg4. mjpeg, 0/7
h264
<integer> 0/7
<a list of the 0/7
Indicate whether to support SIP.
The maximum allowed simultaneous
connections.
The maximum general streaming
connections.
The maximum megapixel streaming
connections.
Indicate whether to support scalable
multicast.
Indicate whether to support backchannel
multicast.
Indicate whether to support RTP over TCP.
Indicate whether to support RTP over
HTTP.
Indicate whether to support server push
MJPEG.
Indicate whether to support SNMP.
Indicate whether to support IPv6.
0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
Available resolutions list.
Available maximum frame list.
Available codec list.
Each stream has its own support codec type.
It is bitwise depends on videoin_codec.
bit0: mpeg4
bit1: mjpeg
bit2: h264
First stream support mjpeg and h264
(bit0:0, bit1:1, bit2:1)
Available codec list.