Vivotek IP8132 User Manual page 101

daylight_enable <boolean>
daylight_dstactua <boolean>
lmode
daylight_auto_be string[19]
gintime
daylight_auto_en string[19]
dtime
daylight_timezon string
es
privacy
<boolean>
privacybuttonof
<boolean>
f
updateinterval 0,
3600,
86400,
604800,
2592000
restore 0,
<positive integer>
reset 0,
<positive integer>
restoreexceptnet <Any value>
restoreexceptdst <Any value>
Melbourne, Sydney, Guam, Vladivostok
440: GMT 11:00 Magadan, Solomon Is.,
New Caledonia
480: GMT 12:00 Aucklan, Wellington,
Fiji, Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
6/6 Enable automatic
time zone.
6/7 Check if current time is under daylight
saving time.
(Used internally)
6/7 Display the current daylight saving start
time.
6/7 Display the current daylight saving end
time.
6/6 List time zone index which support
daylight saving time.
6/6 Represent privacy button status
6/6 0: enable privacy button function
1: disable privacy button function
6/6 0 to Disable automatic time adjustment,
otherwise, it indicates the seconds
between NTP automatic update intervals.
7/6 Restore the system parameters to default
values after <value> seconds.
7/6 Restart the server after <value> seconds if
<value> is non-negative.
7/6 Restore the system parameters to default
values except (ipaddress, subnet, router,
dns1, dns2, pppoe).
This command can cooperate with other
"restoreexceptXYZ" commands. When
cooperating with others, the system
parameters will be restored to the default
value except for a union of the combined
results.
7/6 Restore the system parameters to default
values except all daylight saving time
VIVOTEK
daylight saving time in
User's Manual - 101