Using 3Gpp-Compatible Mobile Devices - Vivotek IP8132 User Manual

Using 3GPP-compatible Mobile Devices

To view the streaming media through 3GPP-compatible mobile devices, make sure the Network
Camera can be accessed over the Internet� For more information on how to set up the Network
Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 6�
To utilize this feature, please check the following settings on your Network Camera:
1� Because most players on 3GPP mobile phones do not support RTSP authentication, make
sure the authentication mode of RTSP streaming is set to disable�
For more information, please refer to RTSP Streaming on page 43�
2� As the bandwidth on 3G networks is limited, you will not be able to use a large video size�
Please set the video streaming parameters as listed below�
For more information, please refer to Viewing Window on page 56�
Video Mode
Frame size
Maximum frame rate
Intra frame period
Video quality (Constant bit rate)
3� As most ISPs and players only allow RTSP streaming through port number 554, please set
the RTSP port to 554� For more information, please refer to RTSP Streaming on page 43�
4� Launch the player on the 3GPP-compatible mobile devices (ex� Real Player)�
5� Type the following URL commands into the player�
The address format is rtsp://<public ip address of your camera>:<rtsp port>/<RTSP streaming
access name for stream 3>�
For example:
MPEG-4
176 x 144
5 fps
1S
40kbps
rtsp://192.168.5.151:554/live3.sdp
VIVOTEK
User's Manual - 13