The Experimental Menu - TANDBERG Codec C90 Administrator's Manual

TANDBERG Codec C90 and Profiles using C90
Contents Contents Introduction Introduction

The Experimental menu

The Advanced configurations menu has an option called Experimental. The settings within this menu
can be used 'as is' and will not be fully documented.
Experimental Audio Input Microphone [1..8] Channel
The Experimental settings can be used 'as is'. NOTE! The Experimental settings WILL change.
Define whether the microphone signal is a mono signal or part of a multichannel signal.
Value space: <Left/Right/Mono>
Left: The microphone signal is the left channel of a stereo signal.
Right: The microphone signal is the right channel of a stereo signal.
Mono: The microphone signal is a mono signal.
Example: Experimental Audio Input Microphone 1 Channel: Mono
Experimental Audio Input Microphone [1..8] EchoControl HighPassFilter
Value space: <On/Off>
Experimental AudioTracking Camera [1..7] Mode
Value space: <On/Off>
Experimental CapsetFilter
Value space: <S: 0, 32>
Experimental Conference [1..1] PacketLossResilience
Value space: <On/Off>
Experimental CustomSoftbuttons State [1..2] Softbutton [1..5] Type
Value space: <NotSet/MainSource/PresentationSource/CameraPreset/Actions/SpeedDial>
Experimental CustomSoftbuttons State [1..2] Softbutton [1..5] Value
Value space: <S: 0, 255>
D14635.03—MAY 2010
Advanced config.
Advanced configuration Advanced configuration Password protection Password protection
NOTE! The Experimenal menu WILL change.
About monitors About monitors Audio matters Audio matters
Experimental SoftwareUpgrade Mode
Value space: <Auto/Manual>
Experimental SoftwareUpgrade ServerAddress
Value space: <S: 0, 255>
Experimental SystemUnit Controller Address
Value space: <S: 0, 255>
37
Administrator guide
Appendices Appendices Contact us Contact us
www.tandberg.com