Lorry Navigation; Setting Up Lorry Parameters - Uniden iGO50 Owner's Manual

4 Lorry Navigation

The Lorry Navigation feature may not be available if your current map
does not support lorry routes.
NOTE
The navigation software gives you some more options if you use it with a lorry:
• You can enter the parameters of your lorry, and your software calculates
your routes taking available weight, height, etc. restrictions into account
(this feature is accurate only if restrictions are available for all roads between
your position and the destination)
• You can use countdown timers to alert you when compulsory breaks must be
taken (timers can be set for one or two drivers)

4.1 Setting up lorry parameters

When you use your software with a lorry, you need to select one of the three lorry
profiles in Route settings as the Vehicle type, and enter the parameters of your
lorry. These parameters are used in route calculation to bypass roads that are
restricted for your lorry. Do as follows:
The procedure is explained starting from the Navigation menu.
1. If you are on the Map screen, tap
2. In the Navigation menu, tap
3. Tap .
to return to the Navigation menu.
, and then .
Page 87