Buttons And Other Controls On The Screen - Uniden iGO50 Owner's Manual

• Tap
live map that shows your current position, the recommended route and the
surrounding map area. Tap the button to enlarge the map to the full screen.
• Tap to stop navigation and exit the software.

2.2 Buttons and other controls on the screen

When you are using the software, you usually tap buttons on the touch screen.
You only need to confirm selections or changes if the application needs to restart,
it needs to perform a major reconfiguration, or you are about to lose some of your
data or settings. Otherwise, the software saves your selections and applies the
new settings without confirmation as soon as you use the controls.
Type
Button
Button
with
value
Page 16
to start navigating on the map. The button itself is a miniature
Example Description
Tap it to initiate a
function, to open a
new screen, or to set
a parameter.
Some buttons
display the current
value of a field or
setting. Tap the
button to change
the value. After the
change, the new
value is shown on
the button.
How to use it
Tap it once.
Tap it once.