Route Settings - Uniden iGO50 Owner's Manual

5.3.4 Route settings

These settings determine how routes will be calculated.
Button
To let the route fit your needs, you can also set which road types are to be
considered for or to be excluded from the route if possible.
Excluding a road type is a preference. It does not necessarily mean total
prohibition. If your destination can only be accessed using some of the excluded
road types, they will be used but only as much as necessary. In this case a
warning icon will be shown on the My Route screen, and the part of the route not
matching your preference will be displayed in a different colour on the map.
In the list of road types you can see in how many segments and what total length
of the road type is used in the current route.
Button
Set up and use countdown timers to monitor the continuous
and daily driving times as described on page 65.
You can set the type of vehicle you will use to navigate the
route. Based upon this setting, some of the road types can
be excluded from the route, or some of the restrictions may
not be taken into account in route calculation.
The route calculation can be optimised for different situations
and vehicle types by changing the planning method. See
below for details.
You might need to avoid motorways when you are driving a
slow car or you are towing another vehicle.
Charge roads are pay roads where you can purchase a pass
or vignette to use the road for a longer period of time. They
can be enabled or disabled separately from toll roads.
Description
Description
Page 107