Attaching the Shoulder Strap
Peel off the pad and thread
the end of the strap through
the eyelet.
Eyelet
Preparing the Remote Control
A battery is included inside the remote control at the time of purchase.
Remove the insulation sheet before use.
Beam Effective Area
Remote Sensor
Effective distance:
Max. 5 m (16 ft)
NOTE
The transmitted beam may not be effective
or may cause incorrect operation when the
remote sensor is directly exposed to sunlight
or powerful lighting.
Attaching the Core Filter to the DC Cord
Attach the core fi lter to the DC cord. The core fi lter reduces interference. Connect the end of the
cable with the core fi lter to the camera.
Release the stopper.
Thread the strap through the
buckle, adjust its length, and use
the strap guide to fi x it in place.
Buckle
Strap Guide
3 cm (1-3/16
)
"
Position the buckle near
the eyelet and reattach
the pad.
To Reinsert the Battery
Pull out the battery holder by pressing the
lock tab.
Lock Tab
Lithium Battery
(CR2025)
Wind once.
11