Attaching The Shoulder Strap; Preparing The Remote Control; Attaching The Core Filter To The Usb Cable And Dc Cord - JVC GZ-MG361E Manual Book

Attaching the Shoulder Strap

Peel off the pad and thread the
end of the strap through the
eyelet.
Eyelet

Preparing the Remote Control

A battery is included inside the remote control at the time of purchase.
Remove the insulation sheet before use.
Effective Beam Distance
Remote Sensor
NOTE
The transmitted beam may not be effective
or may cause incorrect operation when the
remote sensor is directly exposed to sunlight
or powerful lighting.

Attaching the Core Filter to the USB Cable and DC cord

Attach the core fi lter to the USB cable. Also, attach the core fi lter to the DC cord. The core fi lter
reduces interference. Connect the end of the cable with the core fi lter to the camera.
Release the stopper.
Thread the strap through the
buckle, adjust its length, and use
the strap guide to fi x it in place.
Strap Guide
Effective distance:
5 m
3 cm
USB cable: Wind once.
DC cord: Wind twice.
Position the buckle near the
eyelet and reattach the pad.
Buckle
To Reinsert the Battery
Pull out the battery holder by pressing the
lock tab.
Lock Tab
Lithium Battery
(CR2025)
11