Attaching The Shoulder Strap; Preparing The Remote Control; Attaching The Core Filter To The Audio Cable - JVC Everio GZ-HD3 Instructions Manual

Attaching the Shoulder Strap

Peel off the pad and thread
the end of the strap through
the eyelet.
Eyelet

Preparing the Remote Control

A battery is included inside the remote control at the time of purchase.
Remove the insulation sheet before use.
Beam Effective Area
Remote Sensor
Effective distance:
Max. 5 m (16 ft)
NOTE
The transmitted beam may not be effective
or may cause incorrect operation when the
remote sensor is directly exposed to sunlight
or powerful lighting.

Attaching the Core Filter to the Audio Cable

Attach the core fi lter to the audio cable which is used to connect an optional external microphone
to the camera. The core fi lter reduces interference. Connect the end of the cable with the core
fi lter to the camera.
Release the stopper.
Thread the strap through the
buckle, adjust its length, and
use the strap guide to fi x it
in place.
Buckle
Strap Guide
3 cm (1-3/16 )
"
Wind once.
Position the buckle near the
eyelet and reattach the pad.
To Reinsert the Battery
Pull out the battery holder by pressing the
lock tab.
Lock Tab
Lithium Battery
(CR2025)
11