Attaching the Shoulder Strap
Peel off the pad and thread
the end of the strap through
the eyelet.
Eyelet
Attaching the Core Filter
Attach the core fi lter to the AC adapter's DC cord. The core fi lter reduces interference.
Release the stopper.
Preparing the Remote Control
A battery is included inside the remote control at the time of purchase.
Remove the insulation sheet before use.
Beam Effective Area
Remote Sensor
NOTE
The transmitted beam may not be effective
or may cause incorrect operation when the
remote sensor is directly exposed to sunlight
or powerful lighting.
Thread the strap through the
buckle, adjust its length, and
use the strap guide to fi x it
in place.
Strap Guide
3 cm
Effective distance:
5 m
Position the buckle near the
eyelet and reattach the pad.
Buckle
Wind once.
To Reinsert the Battery
Pull out the battery holder by pressing the
lock tab.
Lock Tab
Lithium Battery
(CR2025)
7