Status; Summary Information Of The Router; Dhcp Client - D-Link DSL-2640B User Manual
Hide thumbs
Also See for DSL-2640B:
- User manual (95 pages) ,
- Quick installation manual (61 pages) ,
- Quick install manual (37 pages)
Table of Contents
Advertisement
Web Configuration
Summary Information of the Router
Choose Status > Device Info, the right page appears.
LAN IPv4 Address: The management IPv4 address.
Default Gateway: In the bridging mode there is no gateway. In other modes,
it is the address of the uplink equipment, for example, PPPoE/PPPoA.
DNS Server: In the PPPoE/PPPoA mode, it is obtained from the uplink
equipment. In the bridging mode, there is no DNS Server address and you
can manually enter the information.
LAN IPv6 Address: The management IPv6 address.
Default IPv6 Gateway: No gateway in a pure bridging mode; under other
modes such as PPPoE/PPPoA, it is the address of the uplink equipment
(support IPv6).
DHCP Client
Click DHCP Clients and the right page appears. You can query the IP address
assignment for MAC address at the LAN side of the DSL router and obtain the IP
Address from the DHCP server through Ethernet and wireless in the DSL router.
D-Link DSL-2640B User Manual
Status
109
Advertisement
Table of Contents
