IOGear GWU735 Quick Start Manual page 23

Wi-Fi Protected Setup (WPS) is a simple and secure way to connect
your Mac to an existing network. Before you start, make sure your wireless
router / Access Point (AP) supports WPS. This optional certification feature
provides two connection methods: PIN Input Configuration (PIN) or
Push-Button Configuration (PBC).
Option 1: PIN Input Configuration Method:
1. Open the configuration program for your Wireless Router / Access
Point and select the WPS Client Setup. Then select the PIN
Configuration option.
2. Next, select the WPS tab in the IOGEAR Wireless-AC Network
Utility and enter the pre-generated PIN into the Client PIN field in
your router / AP software.
3. Allow it to configure the security setting of your wireless router / AP.
The WPS client screen you see may vary depending on your router.
23