Table of Contents
Advertisement
5. To set the currently connected network as your default, select the
profile tab and click "Set Default".
Wi-Fi Protected Setup
Wi-Fi Protected Setup (WPS) is a simple and secure way to connect to
an existing network. Before you start, make sure your wireless router
/ Access Point (AP) supports WPS. This optional certification feature
provides two connection methods: PIN Input Configuration (PIN) or
Push-Button Configuration (PBC).
Option 1: PIN Input Configuration (PIN) method:
1. Open the Configuration
program for your wireless
router / Access Point and select
the WPS Client set-up option.
2. Next, select the Wi-Fi
Protect Setup tab in the
IOGEAR USB Wireless LAN
Utility, click the Pin Input
Config (PIN) button.
TM
10
Advertisement
Table of Contents
