D-Link DSL-2650U User Manual page 49

DSL-2650U 3G/ADSL/Ethernet Router
with Wi-Fi and Built-in Switch
User Manual
In the Mode drop-down list, leave the auto value in order to let the router connect automatically to
an available type of network, or select a needed value from the drop-down list. For GSM USB
modems only.
In the Username field, enter your login, and in the Password and Password confirmation
fields – the password provided by your 3G operator.
If authorization is not required, select the Without authorization checkbox.
In the APN field, enter the access point name, and in the Dial number field, enter the number
dialed to connect to the authorization server of the operator.
If needed, specify additional settings for your 3G WAN connection.
Parameter
Authentication
algorithm
MTU
Keep Alive
Dial on demand
PPP debug
Click the Next button to continue.
Select a required authentication method from the drop-down list or
leave the AUTO value.
The maximum size of units transmitted by the interface. Optional.
Select the checkbox if you want the router to
the network of your operator even when the connection has been
inactive for a specified period of time. When the checkbox is
selected, the LCP interval and LCP fails fields are available.
Specify the required values.
Select the checkbox if you want the router to establish connection to
the Internet on demand. In the Maximum idle time field, specify a
period of inactivity (in seconds) after which the connection should
be terminated.
Select the checkbox if you want to log
debugging.
Figure 43. Configuring 3G WAN connection.
Page 49 of 139
Configuring via Web-based Interface
Description
keep you connected to
all data on PPP connection