Camera Setup - D-Link DNR-326 User Manual

Section 3 - Configuration
Step 1: Select the camera which you would like to modify.
Step 2: Modify its information on the top of the page.
Step 3: Click Save Settings.
Step 4: If you would like to replace a camera, select that camera, modify
its address, port, user name, and password, and then click Save
Settings.
Camera Name: Enter a name to identify the camera.
Address: Enter the camera's IP address.
Port: Enter the port used by your camera.
Administrator Enter the administrator name and password used to log in to the
Name/ selected camera.
Password:
Camera Enter which channel this camera should use.
Channel:
Protocol:
Select which protocol this camera should use.
Vendor: Select a manufacturer from the dropdown list.
Model:
Select a model from the dropdown list.
Auto
If you have already entered the camera IP, you may simply click this
Detection:
button to try to automatically detect camera information (such as the
channel, protocol, vendor, and model number).
Note:
Some cameras will limit the login authority to the administrator only.
D-Link DNR-326 User Manual

Camera Setup

22