D-Link DNR-326 User Manual page 32

2-bay professional network video recorder (nvr)

Hide thumbs Also See for DNR-326:

Table of Contents

Section 3 - Configuration

Set Recording Schedule Configuration

Step 1: Enter the desired Start Time and End Time.

Step 2: Enter the pre-record period and post-record for event trigger

recording.

Step 3: Check the Enable Audio box to record audio from your camera (if

supported).

Step 4: Choose the recording mode and the trigger source.

Step 5: Click OK to add this new schedule.

Step 6: If you would like to add another new schedule, click the Insert

button.

Note:

• When configuring the Motion Detection event, be sure to set up the motion detection

function on your camera first.

• After changing the motion detection settings of your camera, be sure to disconnect the

camera from the NVR and then re-connect it to update all new changes.

• Alternatively users can drag the time bar to change the recording period. The red bar

represents the Always Record feature and the blue bar represents the Event Recording

feature.

D-Link DNR-326 User Manual

Recording Schedule

Table of Contents

Show Quick Links

Table of Contents