System - D-Link DNR-326 User Manual

Section 3 - Configuration
Users can save the NVR configuration to a file and restore it when necessary. Occasionally, restarting the NVR can keep the
system running smoothly. Reset the NVR to restore all configurations to factory default.
Restart: If the NVR is malfunctioning or crashes unexpectedly, click Restart on
the NVR. Restarting the NVR will take about one and a half minutes.
Restore: This will reset all configurations to factory default.
Shutdown: This will shut down the NVR.
Save All the configurations can be saved as a file to the specified location.
Configuration Click Save to save the file to your local PC.
Settings:
Load The user can restore the configuration file if they have reset the system
Configuration to the factory default file. Click Choose File to select the configuration
Settings: file and restore it by clicking Load.
Idle Time:
When the administrator enters the Setup pages, except the Live Video
and Playback pages, the NVR will keep track of the idle time when there
is no action taken by the user.
After a certain period of time, it will then force the user to log out and
request the user to log in again for security concerns. Change the idle
time period here.
D-Link DNR-326 User Manual

System

35