Dhp-W610Av Configuration; Setup - D-Link DHP-W611AV User Manual

Powerline av2 1000 wi-fi ac1200 starter kit

Hide thumbs Also See for DHP-W611AV:

Table of Contents

Section 3 - Configuration

DHP-W610AV Configuration

This section covers configuration of your DHP-W610AV PowerLine AV2 1000 Wi-Fi AC1200 Adapter. The DHP-P600AV PowerLine AV2 1000 Gigabit

Passthrough Adapter does not require configuration other than the initial Powerline connection.

If you wish to change the default settings or optimize the performance of the

DHP-W610AV, you may use the web-based configuration utility.

To access the configuration utility, open a web browser such as Internet Explorer

and enter either http://dlinkapWXYZ.local. (this is on the Wi-Fi Configuration

Card) or http://dlinkapWXYZ in the address field.

By default, Admin will be the User Name. Leave the password blank to log in.

If you receive a "Page Cannot be Displayed" error, please refer to Troubleshooting

on page 47 for assistance.

You will automatically proceed to the Setup heading after logging in.

D-Link DHP-W611AV User Manual

Table of Contents

Dhp-p600av Dhp-w610av