Timex W-285 User Manual

thank yoU For PUrchaSinG yoUr timex
extended WarrantY
available in u.S. only. Extend your warranty for an additional 4 years from date of purchase
for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during
normal business hours. Payment must be made within 30 days of purchase. Name, address, tele-
phone number, purchase date, and 5-digit model number required. You can also mail a check for
$5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your Timex
introdUcinG yoUr timex
An important step towards staying healthy is staying active, and the Timex
is a great tool to help you achieve this goal. The walk sensor automatically records steps taken
and then calculates the total distance you cover and how many calories you burn each day.
Knowing this information is empowering, allowing you to take control of your fitness. Seeing
the distance build up each day is motivating and encourages you to walk a little more. Take
the guesswork out of exercise and start towards a healthier you today, with the Timex
Tracker watch.
The walk sensor detects movement through the natural swinging-motion of your arm. For best
results, allow the watch-wearing arm to swing freely during walks. The watch will start recording
movement after five to ten steps.
Set/exit
Customize watch OR
save changes
SteP/diStanCe
(NEXT)
Features in parenthesis are button labels when in setting mode.
• Walk Sensor starts automatically once time of day has been set.
• Tracks distance, steps, and calories burned.
• INDIGLO night-light with NIGHT-MODE
®
1. Set CLOCK and aCtiVate WaLK SenSOr
Setting the clock for the first time automatically activates the walk sensor.
1. Hold SET button to start setting watch.
2. Press + / - to set values.
3. Press NEXT to move to next value.
4. Press EXIT to leave setting mode.
tiP: Gender, age, and height are used to estimate your stride length. You can
also measure and manually enter your stride length, if you want to change the stride length that
was automatically calculated.
2. Start MOVinG
All Day Tracker watch automatically counts steps and calculates distance and calories burned
whenever you walk or run.
The walk sensor detects movement through the natural swinging motion of your arm. For best
results, allow the watch-wearing arm to swing freely during walks. The watch will start recording
movement after five to ten steps.
nOte: When the battery nears the end of life, the display of your steps, distance and calories will
either become noticeably inaccurate or stop displaying all together. The battery should then be
replaced. Refer to the REPLACING THE BATTERY section of this manual for details.
VieWinG tOdaY'S aCtiVitY
The All Day Tracker watch records each step you take and calculates the
distance you traveled and the calories you burned.
At any time during the day you can check the activity you completed so far.
1. Simply press the STEP/DISTANCE button to view steps taken and press
again to view distance covered.
2. Press the calories button to view calories burned.
3. The information automatically resets every day at midnight. The
information on the watch is always for the current day. You cannot reset
the watch yourself.
Replace the battery when required. Battery type is on the
battery hatch.
1. Rotate battery hatch counter-clockwise, following OPEN
arrow (use a coin if hatch is difficult to move). Remove
battery hatch.
2. Rotate plastic cover counter-clockwise until OPEN r
icon points toward top of watch. Remove plastic cover.
3. Remove battery.
4. Insert new battery.
5. Replace plastic cover. Make sure the metal tab is above
the plastic cover. Rotate plastic cover clockwise until
CLOSE r icon points toward top of watch.
6. Follow the pointed arrow and press with a paper clip the pad in deep hole to reset.
7. Replace battery hatch. Rotate hatch clockwise, following CLOSE arrow.
Battery life estimates are based on certain assumptions regarding usage; battery life may vary
depending on actual usage.
dO nOt diSPOSe OF BatterY in Fire. dO nOt reCHarGe. KeeP LOOSe BatterieS aWaY
FrOM CHiLdren.
1. Press INDIGLO button to activate night-light for several seconds.
®
2. Hold INDIGLO button for 4 seconds to activate NIGHT-MODE
®
3. In NIGHT-MODE
®
4. Hold INDIGLO button for 4 seconds to turn off NIGHT-MODE
®
automatically turns off after 8 hours.
Printed in the Phillipines
Register your product at
www.timex.com
W-285
USinG yoUr timex
rePlacinG the Battery
indiGlo niGht-liGht/niGht-mode
®
feature, press any button to activate night-light.
228-095003-01
all day tracker watch
®
FeatUreS
feature.
®
watch SetUP
all day tracker watch
®
NA
watch.
®
watch.
®
All Day Tracker watch
®
indiGLO niGHt-LiGHt
®
(+ increase value)
CaLOrieS
( – decrease value)
CLOSE
CR2032
FeatUre
®
feature.
®
feature. NIGHT-MODE
®
(continued on reverse)
All Day
®
CLOSE
ROTATE COVER
TO REMOVE/REPLACE
BATTERY
PRESS PAD
TO RESET
feature
®