Using The Surround/Dsp Modes - JVC RX-F10S Instructions Manual

Using the Surround/DSP modes

Available Surround/DSP modes vary depending on the speaker settings and the incoming signals. See the table below.
• The numbers inside the parentheses following the incoming signal type indicate the number of the front channels and that of the
surround channels. For example, (3/2) indicates that the signals are encoded with three front signals (left/right/center) and two (stereo)
surround signals.
• For EX/ES setting, see page 20.
Surround back
Incoming signal speaker setting
(SML/LRG/NO)
Dolby Digital EX
Dolby Digital (3/2, 2/2)
Dolby Digital
(3/1, 2/1, 3/0, 1/0)
DTS-ES Discrete 6.1 ch
DTS-ES Matrix 6.1 ch
DTS-ES 96/24 Matrix
DTS, DTS 96/24 (3/2, 2/2)
DTS (3/1, 2/1, 3/0, 1/0)
Incoming signals
Dolby Digital (Dual Mono)
DTS (Dual Mono)
Dolby Digital (2-channel)
DTS (2-channel)
Linear PCM
Analogue
DVD MULTI
NOTES
• For some Dolby Digital EX software, Dolby Digital 5.1-channel
reproduction ("DOLBY D") is applied.
• DTS 96/24 processing is not applied when the EX/ES setting is
activated. If you want to apply the processing, set the EX/ES
setting to "EX/ES : OFF" (see page 20).
• You cannot select "ALL CH ST." when the surround speakers
are set to "NO" in the speaker setting (see page 18).
34
EX/ES setting
(AUTO/ON/OFF)
SML/LRG AUTO/ON
OFF
NO AUTO/ON
OFF
SML/LRG ON
AUTO/OFF
NO ON
AUTO/OFF
SML/LRG/NO AUTO/ON/OFF
SML/LRG AUTO/ON
OFF
NO AUTO/ON
OFF
SML/LRG AUTO/ON
OFF
NO AUTO/ON
OFF
SML/LRG ON
AUTO/OFF
NO ON
AUTO/OFF
SML/LRG/NO AUTO/ON/OFF
Available Surround modes
DUAL MONO
PLII MOVIE, PLII MUSIC,
NEO:6CINEMA, NEO:6 MUSIC
None
Surround mode
DOLBY D EX
DOLBY D
DOLBY D (Virtual Surround Back)
DOLBY D
DOLBY D EX
DOLBY D
DOLBY D (Virtual Surround Back)
DOLBY D
DOLBY D
ES DISCRETE
DTS
DTS (Virtual Surround Back)
DTS
ES MATRIX
DTS
DTS (Virtual Surround Back)
DTS
DTS NEO:6
DTS
DTS (Virtual Surround Back)
DTS
DTS
Available DSP modes
HALL1/2, LIVE CLUB,
DANCE CLUB, PAVILION,
THEATRE1/2, MONO FILM,
Virtual Surround Back
If you have connected (and activated) the surround speakers,
you can use Virtual Surround Back when playing back Dolby
Digital EX or DTS-ES software without connecting the
surround back speaker.
This function creates the great surround effect from the behind
as if you have connected the surround back speaker. The
VIRTUAL SB (Surround Back) indicator lights up on the
display.
DSP modes
HALL1/2,
LIVE CLUB,
DANCE CLUB,
PAVILION,
THEATRE1/2,
ALL CH ST.
ALL CH ST.
None