JVC RX-F10S Instructions Manual page 14

7 Connecting another video component to the VIDEO IN jacks
If your video components have S-video (Y/C-separation) and/or component video (Y, P
cable (not supplied) and/or component video cable (not supplied). By using these jacks, you can get better picture quality in the order:
Component video > S-video > Composite video
To enjoy the playback from the component connected to these jacks, select "VIDEO" as the source (see page 12).
AUDIO
COMPONENT
VIDEO IN
DVR/DVD
IN
White
Red
Green
Blue
7 Connecting a TV to the MONITOR OUT jacks
DVR/DVD
IN
MONITOR
OUT
Y P
RIGHT LEFT
B
White
Red
Green
Blue
10
VIDEO
VIDEO S-VIDEO
CENTER
SUB-
Yellow
Composite video
cable (not supplied)
Red
Component video cable
(not supplied)
Stereo audio cable
(not supplied)
P
R
Red
Component video
cable (not supplied)
Stereo audio cable
(not supplied)
, P ) terminals, connect them using an S-video
B R
Turn off all components before making
connections.
S-video cable (not supplied)
Å
VCR, etc.
ı
Ç
Å To S-video output
ı To composite video output
Ç To component video output
Î To left/right audio channel output
NOTE
Connect Y, P , and P correctly.
B R
Turn off all components before making
connections.
TV
Å ı
Å To component video input
ı To left/right audio channel input
IMPORTANT
Audio signals come out through the AUDIO MONITOR OUT (RIGHT/
LEFT) jacks ONLY when TV Direct is in use (see page 14).
NOTE
Connect Y, P , and P correctly.
B R
Î