KTM 125 ECX EU Owner's Manual page 70

SERVICE WORK ON THE CHASSIS
(All 125/200 models)
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal posi-
tion.
–
Remove screws
–
Remove cover
400245-10
–
Fill bleeding syringe
Bleed syringe (50329050000)
Hydraulic fluid (15) (
–
On the slave cylinder, remove bleeder screw
B00041-10
–
Inject the liquid into the system until it escapes from hole
cylinder without bubbles.
–
To prevent overflow, drain fluid occasionally from the master cylinder reservoir.
–
Remove the bleeding syringe. Mount and tighten the bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level under top edge of con-
tainer
400247-10
–
Position the cover with the membrane. Mount and tighten the screws.
(All 250/300 models)
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal posi-
tion.
–
Remove screws
–
Remove cover
B00040-10
–
Fill bleeding syringe
Bleed syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
–
On the slave cylinder, remove bleeder screw
303440-10
–
Inject the liquid into the system until it escapes from hole
cylinder without bubbles.
–
To prevent overflow, drain fluid occasionally from the master cylinder reservoir.
–
Remove the bleeding syringe. Mount and tighten the bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level under top edge of con-
tainer
B00042-10
–
Position the cover with the membrane. Mount and tighten the screws.
.

with membrane .
 
with the appropriate hydraulic fluid.

p. 127)
4 mm (0.16 in)
.

with membrane .
 
with the appropriate hydraulic fluid.

p. 126)
4 mm (0.16 in)
and mount bleeding syringe

of the master

and mount bleeding syringe

of the master

68
.

.
