KTM 125 ECX EU Owner's Manual page 45

TUNING THE CHASSIS
1 0 0 1
2 0 0 2
–
Remove screws
0 0 1 1
to one side.
2 0 0 2
Info
Protect the motorcycle and its attachments against damage by covering
them.
Do not bend the cables and lines.
–
Remove screws
–
Place the handlebar support in the required position. Mount and tighten screws
400223-10
Guideline
Screw, handlebar support
Info
Position the left and right handlebar supports evenly.
–
Position the handlebar.
Info
Make sure cables and wiring are positioned correctly.
–
Position the handlebar clamp. Mount and tighten screws
Guideline
Screw, handlebar clamp
. Remove the handlebar clamp. Remove the handlebar and lay it

. Remove the handlebar support.

M10
M8
Loctite ® 243™
40 Nm
(29.5 lbf ft)
.

20 Nm
(14.8 lbf ft)
43
.
