SERVICE WORK ON THE CHASSIS
–
Position the upper triple clamp with the steering.
–
Mount screw
–
Position the clutch line and wiring harness.
B00807-11
–
Position the fork legs.
Info
The upper milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws
B00811-10
–
Tighten screws
Guideline
Screw, bottom triple clamp
B00804-12
–
Tighten screw
Guideline
Screw, top steering head
B00811-11
–
Tighten screw
Guideline
Screw, top steering stem
B00811-12
–
Tighten screws
Guideline
Screw, top triple clamp
B00804-13
but do not tighten yet.
toward the front.
.
.
.
M8
.
M8
12 Nm (8.9 lbf ft)
M20x1.5
12 Nm (8.9 lbf ft)
17 Nm
Loctite
®
(12.5 lbf ft)
M8
17 Nm
(12.5 lbf ft)
51
243™