Superior BRT4036TMN Installation And Operation Instructions Manual page 15

0.5"
Figure 21 - Pan and Ember Material
Clearances
LOG PLACEMENT FOR BRT4036,
BRT4336 AND BRT4536 MODELS
1. Place small front right log (log 1) on right
front of grate as shown in Figure 22.
2. Place large back log (log 2) onto grate
making sure notches rest over grate as
shown in Figure 22.
3. Place log 3 into notch on log 2, resting
front end on top of log 1 (see Figure 23).
4. Place upper end of log 4 into notch on log
2 as shown in Figure 23. Rest lower end
of log 4 onto middle grate finger as shown
in Figure 24.
5. Place upper end of log 5 into notch on left
of log 2 (see Figure 24). Rest lower end
of log 5 on grate as shown in Figure 25.
6. Insert lower end of log 6 between first
two grate fingers as shown in Figure
25 and position upper end of log 6 into
notched area on front of log 2 as shown
in Figure 25.
As an option to enhance the look of the hearth,
you may place the lava rock provided around
front and sides of burner.
Log 2
Notch
Figure 22 - Installing Logs 1 and 2
126736-01B
INSTALLATION
Grate
Pan and Ember
Material
0.5"
Burner Pan
www.SuperiorFireplaces.US.com
Continued
NOTICE: Do not put lava rock in-
side burner pan or around the air
mixer fitting. Placing lava rock
inside burner pan or blocking
openings of the propane/LP air-
mixer could cause performance
problems.
Log 2
Figure 23 - Installing Logs 3 and 4
Log 6
Notch
Figure 24 - Installing Logs 5 and 6
Log 1
Figure 25 - Logs Installed for M36, M36P,
Log 4
Log 5
VM36 and VM36P Models
Log 3
Notches
Log 1
Notch
Log 4
15