Shot Mark Error
- Could not add a shot mark. If the message appears in
add the mark in
mode after you finish recording. If the message appears in
and then back on. Then, try to add the mark again.
System error
- Turn off the camera and back on again. If this does not solve the problem, there may be a malfunction with the camera.
Consult a Canon Service Center.
This photo cannot be displayed
- You may not be able to display photos taken with other devices or image files created or edited on a computer.
mode, try adding the mark again. If that does not work,
Troubleshooting
mode, turn off the camera
191