Table of Contents
Advertisement
SD-SDI:
SMPTE 259M
Video: Resolution: 640x480, 768x576
Frame rate: 59.94i, 50.00i
Embedded audio, time code (VITC/LTC), LUT (BT. 709, Wide DR)
4
Available frame rates depend on the resolution and recording mode settings.
• HDMI OUT Terminal
HDMI connector, output only
• SYNC OUT Terminal
BNC jack, output only, 1 Vp-p / 75 Ω
Output signal: HD component video luminance signal (HD-Y), HD analog tri-level signal, Analog blackburst
signal, SD composite video
• MIC Terminal
∅ 3.5 mm stereo mini-jack, -72 dBV (manual volume center, full scale -18 dB) / 600 Ω
Microphone attenuator: 20 dB
• × (Headphone) Terminal
∅ 3.5 mm stereo mini-jack, -G to -12 dBV (16 Ω load, volume range Min to Max) / 50 Ω or less
• GENLOCK Terminal
BNC jack, input only: 1 Vp-p / 75 Ω
• TIME CODE Terminal
BNC jack, input/output
Input: 0.5 Vp-p to 18 Vp-p / 10 kΩ
Output: 1 Vp-p / 75 Ω
• REMOTE Terminal
∅ 2.5 mm stereo mini-jack
• WFT Terminal
Proprietary connector for the optional WFT-E6 Wireless File Transmitter
• GRIP Terminal
Same as the grip unit connection terminal on the C300 / C300 PL or C100 camcorder
Power/Others
• Power Supply (rated)
7.4 V DC (battery pack), 8.4 V DC (DC IN)
• Power consumption (For each mode, viewfinder/LCD screen normal brightness, HD/SD SDI output on.
For 4K and 2K modes, MON. and 3G-SDI output on, simultaneous MXF recording at 50 Mbps.)
During 4K mode, RAW, 4096x2160:
During 2K mode, RGB444, 2048x1080:
During MXF mode, 50 Mbps 1920x1080, 24.00P: 12.4 W
Maximum rated power consumption: 31.0 W
• Operating Temperature
0 – 40 °C (32 – 104 °F)
• Dimensions (W x H x D)*
Camera unit only:
2 160 x 179 x 171 mm (6.3 x 7.0 x 6.7 in.) 3 160 x 179 x 177 mm (6.3 x 7.0 x 7.0 in.)
Configuration with monitor unit:
185 x 249 x 187 mm (7.3 x 9.8 x 7.4 in.)
Configuration with handle unit and monitor unit:
185 x 284 x 301 mm (7.3 x 11.2 x 11.9 in.)
* All dimensions are approximate.
59.94P: 23.9 W, 50.00P: 22.9 W
59.94P: 20.9 W, 50.00P: 20.9 W
Specifications
203
Advertisement
Table of Contents
