Ford 2010 Escape User Manual page 220

Driving
Button
functions
Default at
start-up
Button pressed
momentarily
Button pressed
again after
deactivation
Trailer sway control (if equipped)
Your vehicle may be equipped with trailer sway control (TSC). When
properly equipped, trailer sway control will use the sensors of the
vehicle's AdvanceTrac with RSC system to detect and attempt to
mitigate trailer sway by applying brake force at individual wheels and, if
necessary, by reducing engine power. No driver action is required.
WARNING: Trailer sway control does not prevent a trailer from
swaying, it mitigates the sway from increasing once it has
occurred. TSC cannot stop all trailers from swaying. If you are
experiencing trailer sway, it is likely that the trailer is improperly
loaded for the correct tongue weight or the speed of the vehicle and
trailer is too high. Pull the vehicle-trailer over to a safe location to
check the trailer weight distribution and tongue load and reduce speed
to a safe level while towing. If trailer sway is experienced, SLOW
DOWN. Always use caution when towing a trailer and follow the
tongue weight recommendations. Refer to the Trailer towing section
in the Tires Wheels and Loading chapter of this owner's guide for
more information on towing a trailer with your vehicle.
During trailer sway control events the
will flash momentarily. In some cases when trailer sway is detected, the
vehicle speed is too high and may be at or above a speed at which trailer
sway will grow continuously. This may cause the system to activate
multiple times, and you may experience a slight deceleration of the
vehicle.
220
AdvanceTrac with RSC Features
"Sliding
car"
icon
Illuminated
during bulb
check
Illuminated
solid
Not
illuminated
RSC ESC
Enabled Enabled
Enabled Enabled
Enabled Enabled
icon in the instrument cluster
Traction
Control
Enabled
Disabled
Enabled