Auto Check Control - Skoda Fabia Owner's Manual


If you do not activate the information display at that moment, the menu shifts
to one level higher every 10 seconds.

The operation of the factory-fitted radio or the navigation system is described
in separate operating instructions to be found in the on-board literature.
Door, luggage compartment door and bonnet ajar warning
The door, luggage compartment and bonnet ajar warning lights up if at least one
door, the luggage compartment or bonnet are not closed. The symbol indicates
which door is still open or whether the luggage compartment door or bonnet is not
closed.
The symbol goes out as soon as the doors, luggage compartment door and bonnet
are completely closed.
A warning signal sounds if the car is driven at a speed of more than 6km/hour and
if the engine or the luggage compartment door is open.

Auto Check Control

Car state
The Auto Check Control carries out a check of certain functions and vehicle compo-
nents. The check is performed constantly when the ignition is switched on, both
when the vehicle is stationary, as well as when driving.
Some operational faults, urgent repairs, service work or other information appear in
the display of the instrument cluster. The displays are shown with a red or yellow
light symbol depending on the priority of the message.
The red symbols indicate danger (priority 1) while the yellow symbols indicate a
warning (priortity 2). Information for the driver may also appear in addition to the
symbols  page 25.
There is at least one error message when the term Vehicle status is displayed in the
menu. After selecting this menu the first of the error messages is displayed. Several
error messages are shown on the display under the message e.g. 1/3. This indicates
that the first of a total of three error messages is displayed. The respective
messages are displayed one after the other in an interval of 5 seconds. Check as
soon as possible the displayed error messages.
As long as the operational faults are not rectified, the symbols are always indicated
again. After the first display, the symbols are indicated without information for the
driver.
Using the system Safety
If a fault occurs, a warning signal will also sound in addition to the symbol and text
in the display:


Red symbols
A red symbol signals danger.
–
–
–
–
Meaning of the red symbols:
Three successive warning signals will sound if a red symbol appears.
Yellow symbols
A yellow symbol signals a warning.
Check the relevant function as soon as possible.
The meaning of the yellow symbols:
One warning signal will sound if a yellow symbol appears.
If several operational faults of priority 2 exist, the symbols appear one after the
other and are each illuminated for about 5 seconds.
Driving Tips General Maintenance
Priority 1 - three warning signals
Priority 2 - one warning signal
Bring the vehicle to a stop.
Switch the engine off.
Investigate the function indicated.
Obtain professional assistance.

Engine oil pressure too low
Overheated clutches of the automatic gear-

box DSG
Check engine oil level,

engine oil sensor faulty
Breakdown assistance
Instruments and warning lights
 page 28
 page 95
 page 28
Technical data
23