Seagate ST300MP0004 Product Manual page 54

Table 8 Supported commands
Command name
Write and Verify (16)
Write and Verify (32)
Write Buffer (modes 0, 2, supported)
Write Buffer
Firmware Download option (modes 5, 7, Ah and Bh) [3]
Firmware Download option (modes 4, 5, 7)
Write Long (10)
Write Long (16)
Write Same (10) [5]
PBdata
LBdata
Write Same (16) [5]
Write Same (32)
XDRead
XDWrite
XPWrite
[1] Enterprise Performance 15K HDD and Enterprise Turbo SSHD drives can format to 512, 520, 524, or 528 bytes per logical block.
[2] Warning. Power loss during flash programming can result in firmware corruption. This usually makes the drive inoperable.
[3] Reference Mode Sense command 1Ah for mode pages supported.
[4] Y = Yes. Command is supported.
N = No. Command is not supported.
A = Support is available on special request.
[5] Approximately 1.5 increase in time to complete this command for a SED drive versus a non-SED drive of the same capacity.
S E P
EAGATE NTERPRISE ERFORMANCE
15K HDD 4 T SSHD P
V AND URBO
Command code Supported
8Eh Y
7Fh/000Ch N
3Bh Y (non-SED drives only)
3Bh
Y (non-SED drives only)
Y (SED drives only)
3Fh Y
9Fh/11h Y
41h Y
N
N
93h Y
7Fh/000Dh N
52h N
50h N
51h N
M , R . C
RODUCT ANUAL EV
48