Copying Difficulties; Scanning Difficulties - Brother MFC-J200 Basic User's Manual

Copying Difficulties

Difficulty
Vertical black lines or streaks
appear in copies.
Poor copy results when using the
ADF.
Fit to Page does not work correctly. Make sure your source document is not skewed.

Scanning Difficulties

Difficulty
TWAIN or WIA errors appear when
starting to scan. (Windows
TWAIN or ICA errors appear when
starting to scan. (Macintosh)
OCR does not work.
Poor scanning results when using
the ADF.
 Vertical black lines appear in
the scanned data.
Software Difficulties
Difficulty
Cannot install software or print.
"Device Busy"
92
Suggestions
Black vertical lines on copies are typically caused by dirt or correction fluid on the
glass strip. Clean the glass strip, scanner glass, white bar and white plastic above
them. (See Cleaning the scanner glass on page 60.)
Try using the scanner glass. (See Using the scanner glass on page 21.)
Reposition the document and try again.
Suggestions
(Not available in Taiwan)
®
)
Make sure the Brother TWAIN or WIA driver is chosen as the primary source in
your scanning application. For example, in Nuance™ PaperPort™ 12SE, click
Scan Settings, Select to choose the Brother TWAIN/WIA driver.
(Taiwan only)
Make sure the Brother TWAIN/WIA driver is chosen as the primary source. In
Presto! PageManager with OCR, click File, Select Source and choose the
Brother TWAIN/WIA driver.
Make sure the Brother TWAIN driver is chosen as the primary source.
In PageManager, click File, Select Source and choose the Brother TWAIN driver.
You can also scan documents using the ICA Scanner Driver.
(See Software and Network User's Guide.)
Try increasing the scanner resolution.
(Macintosh)
Presto! PageManager must be downloaded and installed before use.
For more information, see Accessing Brother Support (Macintosh) on page 5.
Clean the white bar in the ADF and the glass strip underneath it.
(See Cleaning the scanner glass on page 60.)
Try using the scanner glass. (See Using the scanner glass on page 21.)
Suggestions
®
(Windows )
Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair
and reinstall the software.
Make sure the machine is not showing an error message on the LCD.