Turn Signal And Lane Change Indicator - Chevrolet Metro 1999 Owner's Manual

Horn
Your can sound the horn by pressing one of the horn
symbols on your steering wheel.
Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes your:
D

Turn Signal and Lane Change Indicator

D
Headlamp High/Low Beam Changer
D
- -
Flash to Pass
2-24
Turn Signal and Lane Change Indicator
The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the lever all the way up or
down. When the turn is finished, the lever will
return automatically.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
As you signal a turn or a lane change, if the arrows don't
flash but just stay on, a signal bulb may be burned out
and other drivers won't see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you
signal a turn, check for burned
fuse (see "Fuses and Circuit Breakers" in the Index).
An arrow on the instrument
panel will flash in the
direction of the turn or
lane change.
-
out bulbs and check the
yellowblue