Turn Signal And Lane Change Indicator - Chevrolet TRACKER 1999 Owner's Manual

Second Printing for Chevrolet Tracker Owner's Manual – 1999

Turn Signal and Lane Change Indicator

The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return automatically.
X–02–1321–T
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
As you signal a turn or a lane change, if the arrows don't
flash but just stay on, a signal bulb may be burned out
and other drivers won't see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you
signal a turn, check the fuse (see "Fuses and Circuit
Breakers" in the Index) and for burned
An arrow on the instrument
panel will flash in the
direction of the turn or
lane change.
-
out bulbs.
Headlamp High/Low Beam Changer
First, you must have the headlamps on. For high beams,
push the turn signal lever toward the instrument panel.
X–02–3323–T
To switch back to low beams, pull the lever toward you.
Flash-to-Pass
-
With the lever in the low
toward you to momentarily switch to high beam (to
signal that you are going to pass). When you release the
lever, the headlamps will return to low
yellowblue
When the high beams are
on, a light on the instrument
panel also will be on. It will
go off when you switch to
low beam.
beam position, pull the lever
-
beam operation.
2-31