Documents That Can Be Loaded Directly Into The Scansnap - Fujitsu ScanSnap S1100i Basic Operation Manual

Documents That Can Be Loaded Directly into the ScanSnap

Conditions for documents that can be loaded directly into the ScanSnap are as follows:
Eject method With the output guide closed
(*1)
Document type Office paper, postcards, business cards
Plastic cards conforming to the ISO7810 ID-1
type (54 × 86 mm/3.37 × 2.13 in.) (*2)
Paper weight
52.3 to 209.3 g/m
When merging scanned images
automatically (*3)
52.3 to 104.7 g/m
Plastic cards
0.76 mm (0.03 in.) or less (embossed cards
can be used)
Paper size Width
25.4 to 216 mm (1 to 8.5 in.)
For a dual scan, a total width of 200 mm (7.87 in.) or less for two documents
Length
25.4 to 360 mm (1 to 14.17 in.)
For long page documents, up to 863 mm (34 in.)
When merging scanned images automatically (*3)
l A3 (297 × 420 mm)
l B4 (257 × 364 mm)
l Double Letter (11 × 17 in. (279.4 × 432 mm))
*1: For details about the eject methods, refer to
*2: A dual scan cannot be used for plastic cards.
*3: Fold in half to scan.
ATTENTION
l The following types of documents must not be scanned:
- Documents attached with the metals such as paper clips or staples that can damage the inside
of the ScanSnap
Remove the metals for scanning.
- Documents on which the ink is still wet
Wait until the ink dries completely to scan these documents.
- Documents larger than 216 × 863 (mm)/8.5 × 34 (in.) (width × length)
- Documents other than paper such as fabric, metal foil and OHP film
l When you scan picture postcards, be aware that the picture side may get damaged. It is the
responsibility of the customer to scan picture postcards.
l Be careful of the following when you scan plastic cards:
- Cards that are bent may not be fed properly.
- If the surface of the card is dirty with grease marks such as fingerprints, perform scanning after
wiping the dirt off.
2
(14 to 56.1 lb)
2
(14 to 28 lb)
"Parts and Functions" (page
48
With the output guide open
Office paper
2
52.3 to 80 g/m (14 to 20 lb)
33).
Documents to Scan