Roof/Deck Panel Motor Construction - Mazda 3 2007 Service Highlights

ROOF/DECK PANEL MOTOR CONSTRUCTION

• Consists of a motor, connector, and gear.
• Two Hall effect switches are located in the connector.
• In the connector, the roof motor has one Hall effect switch and the deck panel motor has two (only one Hall
effect switch is used). (The Hall effect switch does not detect rotation direction.)
• Hall effect switch 1 outputs one pulse cycle for each rotation of the motor axle and the power retractable
hardtop control module detects motor rotation speed from this.
Roof panel motor construction view
A
EXTERIOR TRIM
HALL EFFECT SWITCH
A
HI
LO
ONE REVOLUTION
OF POWER WINDOW
MOTOR
id091600101800
MAGNET
SEC. A—A
amxuun0000004
09-16–17