2002 Focus Workshop Manual
36. Install the coil bracket, coil and spark plug wires.
37. Connect the spark plug wires.
38. Install a new gasket and the intake manifold.
Tighten the nuts and bolts to 10 Nm and 90 degrees.
39. Install the intake manifold bracket.
40. Position the fuel charging wire harness.
41. Connect the electrical connectors.
Camshaft position (CMP) sensor
IMRC
Ignition coil
Capacitor
Water temperature sender unit
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS2Y/~MUS~LEN/20/S...
Page 7 of 9
6/19/2008