Advertisement
TOYOTA Corolla (coupe-upper dash) 1993-97
1
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
the climate control knobs and unsnap the
dash trim bezel. Disconnect the clock and
hazard leads.
TOYOTA MR2 1991-94
1
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
the ashtray and (2) screws from the ashtray
cavity.
Unsnap and remove the shifter
console bezel. Remove (1) screw below the
ignition switch and remove the dash trim
bezel.
6
2
Remove the mounting brackets from the
factory head unit assembly. Align the holes
in the mounting brackets with the holes in the
Pocket.
Mount the factory mounting
brackets to the Pocket with those screws
previously removed.
2
Remove the mounting brackets from the
factory head unit assembly. Align the holes
in the mounting brackets with the holes in the
Pocket.
Mount the factory mounting
brackets to the Pocket with those screws
previously removed.
TOYOTA Pickup 1984-88
1
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
the ashtray and (3) screws from the ashtray
bracket. Remove (1) screw from each side
of the dash console and unsnap the trim
bezel.
TOYOTA Pickup 1989-91
1
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
the driver's side speaker panel by removing
(3) screws and (1) 10mm bolt. Remove (1)
screw from the left side of the housing and
unsnap the ignition cover.
Remove the
glove compartment assembly by removing
(1) 10mm bolt from the bottom of the
speaker panel and (3) screws from the right
side of the housing. Remove the remaining
(3) screws securing the radio trim bezel.
2
7
Advertisement
