Dodge 1500 User Manual page 63

Start pairing procedure on mobile phone
• Search for available devices on your Bluetooth
usually within Settings or Options under "Bluetooth". See your mobile phone's
manual for details.
• When your phone finds the system, select "Uconnect" as the paired device.
Complete the pairing procedure
• When prompted on the phone, enter the 4-digit PIN number shown on the
Uconnect™ Screen.
• If your phone asks you to accept a connection request from Uconnect, select
"Yes". If available, check the box telling it not to ask again – that way your phone
will automatically connect each time you start the vehicle.
Select the mobile phone's priority level
• When the pairing process has successfully completed, the system will prompt you
to choose whether or not this is your favorite phone. Selecting Yes will make this
phone the highest priority. This phone will take precedence over other paired
phones within range. Only one phone can be paired at a time.
• You are now ready to make hands-free calls. Press the Uconnect™ Phone button
on your steering wheel to begin.
Making A Phone Call
• Press the Uconnect™ Phone button
• (After the BEEP), say "dial" then the number (or "call" then the name as listed in
your phone; see Phonebook).
NOTE:
You can also initiate a call by using the touch-screen on the Phone main screen.
Receiving A Call – Accept (And End)
• When an incoming call rings/is announced on Uconnect™, press the Phone
button .
• To end a call, press the Phone button
Mute (Or Unmute) Microphone During Call
• During a call, touch the mute soft-key on the Phone main screen to mute and
unmute the call.
Transfer Ongoing Call Between Handset And Vehicle
• During a call, touch the Transfer soft-key on the Phone main screen to transfer an
on going call between handset and vehicle.
ELECTRONICS
enabled mobile phone. This is
®
.
.
61