Ford Mustang 2001 Owner's Manual page 208

Capacities and specifications
Fluid
Rear axle
2
lubricant
Fuel tank
Transmission fluid
3
Windshield
washer fluid
1
Add the coolant type originally equipped in your vehicle.
2
Rear axle lubricants do not need to be checked or
changed unless a leak is suspected, service is required or
the axle assembly has been submerged in water. The axle
lubricant should be changed any time the rear axle has
been submerged in water. Fill 6 mm to 14 mm (1/4 inch to
9/16 inch) below bottom of fill hole. Add 118 ml (4 oz.) of
Additive Friction Modifier C8AZ-19B546-A or equivalent
meeting Ford specification EST-M2C118–A for complete
refill of Traction-Lok axles.
3
Ensure the correct automatic transmission fluid is used.
Transmission fluid requirements are indicated on the
dipstick or on the dipstick handle. MERCON and
MERCON V are not interchangeable. DO NOT mix
MERCON and MERCON V. Refer to your scheduled
maintenance guide to determine the correct service
interval.
4
Indicates only approximate dry-fill capacity. Some
applications may vary based on cooler size and if equipped
with an in-tank cooler. The amount of transmission fluid
and fluid level should be set by the indication on the
dipstick's normal operating range.
Ford Part Name Application
Motorcraft SAE
80W-90 Premium
Rear Axle
Lubricant
Motorcraft SAE
75W-140
Synthetic Rear
Axle Lubricant
N/A
Motorcraft
MERCON V ATF
Motorcraft
MERCON ATF
Mobil 1
Synthetic ATF
Ultra-Clear
Windshield
Washer
Concentrate
7 .5 inch axle
8.8 inch axle
All
Automatic with
3.8L OHV V6
engine
Automatic with
4.6L SOHC V8
engine
Manual with 3.8L
OHV V6 engine
Manual with 4.6L
SOHC V8 engine
All
Capacity
1.5L (3.25 pints)
2.0L (4.25 pints)
59.4L (15.7
gallons)
13.1L (13.9
4
quarts)
12.0L (12.8
4
quarts)
2.6L (5.6 pints)
3.8L (8.0 pints)
3.8L (4.0 quarts)
207
5
5